Pro-Ject XTension 10 Evolution levysoitin ilman äänirasiaa

Superlative vinyl performance in a more compact size!

The Xtension 10 chassis is made from MDF filled with metal sand, that gives high mass and is non-resonant. Magnetic feet, which decouple the main plinth from its base, are combined with a weighty 22 kg total turntable mass. With these two magnets located in the feet, the turntable is practically floating.The result is a unique combination of ‘mass loaded’ and ‘floating turntable’ design principles. Instead of the old standard adoption of pure metal used for the main platter, we’ve found a perfect alloy which we damped on the inner side with Sorbothane®. Additionally we’ve glued recycled Vinyl records to the top (which act as a perfect mat) and bake this ‘sandwich’ before precision balancing it. The final product subsequently benefits from a wonderfully resonance-free, heavy platter, that runs ultrasilently on an inverted ceramic ball bearing with magnetic suspension. The Pro-Ject 10” Evolution with its tonearm base also benefits from ‘high-mass’ technologies, and is isolated from the main board by a sheet of Sorbothane®. To use this tonearm with a wide range of top quality phono cartridges, from 4 to 14 Grams it comes with a set of 4 different Sorbothane®- damped counterweights.

picture

Pro-Ject Audio Systems offers their high-end turntables with premium 5pin > RCA unbalanced arm cable or – by request – with premium balanced 5pin > XLR connection to Pro-Ject Phono Box RS preamplifier. Phono Box RS offers balanced phono inputs, what guarantees superior results in high-end vinyl reproduction with a balanced signal source.
NOTE: The signal source and the receiving device have to be equipped with balanced connections. Transmission of audio signals in a balanced mode reduce the influence of interference due to external stray electric fields significantly.

In the box:
• Xtension 10 Evolution optionally as SuperPack with Ortofon Cadenza Black
• Connect it 5P-C RCA Cable (Upgrade option: 5P-XLR)
• Dust cover
• Adapter for 7“ singles
• Record puck
• Counterweights for 4-14g cartridges
• Power supply, allen key, spirit level, gloves

picture

Features

Super-heavy 22 kg belt drive turntable
Mass loaded magnetic floating subchassis
Precision balanced sandwich-platter
Inverted ceramic ball bearing with magnetic support
Heavy weight record clamp
Extremely low level of natural resonance
Perfect decoupling through magnetic feet
Electronic speed control 33/45/78 Upm
Tonearm 10cc Evolution made from carbon fibre
Inverted tonearm bearings (ABEC 7 quality)
Dust cover included

Speed 33 / 45 / 78 rpm (Speed Box DS built-in)
Acrylic dust cover yes
Pro-Ject tonearm cable included Connect it 5P-C
Aluminium feet Magnetic supported & Sorbothane damped
Turntable main bearing damping heavy weight metal block
Max. speed variance ±0,08%
Max. wow and flutter ±0,01% Max.
Rumble -73dB
Platter weight/diameter 5,7kg/300mm
Effective arm length / overhang 254mm / 16mm
Effective tonearm mass 8,5g
Tracking force range 10-30mN
Cartridge weight range from 4 – 14g (4 different counterweights included)
External power supply (prim/sec) 220 – 240V/50Hz / 16V/1.000mA AC
Power consumption 15W (max.)
DimensionsWxHxD lid closed (lid open) 480 x 235 (495) x 400 (535)mm
Weight 22 kg