Ostoskori on tyhjä.

Match PP62DSP 5-Kanavainen DSP Vahvistin

Match PP62DSP 5-Kanavainen DSP Vahvistin

4/5

Saatavuus : Varastossa

499,00  / kpl

Ilmainen toimitus yli 100 € tilauksiin!

Match PP62DSP 5-kanavainen vahvistin sisäänrakennetulla DSP:llä

Huippuluokan autovahvistin sisäänrakennetulla 5-kanavaisella digitaalisella signaaliprosessorilla (DSP).

Output power RMS / max.
– @ 4 Ohms 4 x 35 / 70 Watts (Font/Rear channels)
– @ 2 Ohms 4 x 50 / 100 Watts (Font/Rear channels)
– @ 1 Ohm –
– bridged @ 4 Ohms –
– bridged @ 2 Ohms –
– Subwoofer output @ 4 Ohms –
– Subwoofer output @ 2 Ohms 1 x 160 / 320 Watts (4 channels each 40 / 80 Watts)
Amplifier technology Class AB
Inputs 4 x Highlevel speaker input
1x MEC
1 x Remote In
Input sensitivity Highlevel 5 – 11 Volts
Input impedance RCA / Cinch –
Input impedance highlevel 13 Ohms
Outputs 8 x Speaker output
2 x RCA / Cinch
1 x Remote Out
Output voltage RCA / Cinch 3 Volts RMS
Frequency response 20 Hz – 22,000 Hz
DSP resolution 56 Bit
DSP power 172 MHz
Sampling rate 48 kHz
DSP type Audio signal processor
Signal converters A/D: BurrBrown
D/A: BurrBrown
Signal-to-noise ratio digital input –
Signal-to-noise ratio analog input 103 dB (A-weighted)
Distortion (THD) 0.01 %
Damping factor 100
Operating voltage 10.5 Volts (max. 5 sec.down to 6 Volts)
Current draw 670 mA
Max. remote output current 500 mA
Fuse 1 x 20 A Maxi-fuse (APX)
Additional features Variable input sensitivity, fully stabilized internal power supply with start-/stop capability, 56 Bit digital signal processing, internal memory for two different sound setups, USB input, MATCH Extension Card slot, input for optional remote control, stereo line outputs with balanced output transformers (floating ground)
Dimensions (H x W x D) 44 x 185 x 139 mm /<…Jatka lukemista

Output power RMS / max.
– @ 4 Ohms 4 x 35 / 70 Watts (Font/Rear channels)
– @ 2 Ohms 4 x 50 / 100 Watts (Font/Rear channels)
– @ 1 Ohm –
– bridged @ 4 Ohms –
– bridged @ 2 Ohms –
– Subwoofer output @ 4 Ohms –
– Subwoofer output @ 2 Ohms 1 x 160 / 320 Watts (4 channels each 40 / 80 Watts)
Amplifier technology Class AB
Inputs 4 x Highlevel speaker input
1x MEC
1 x Remote In
Input sensitivity Highlevel 5 – 11 Volts
Input impedance RCA / Cinch –
Input impedance highlevel 13 Ohms
Outputs 8 x Speaker output
2 x RCA / Cinch
1 x Remote Out
Output voltage RCA / Cinch 3 Volts RMS
Frequency response 20 Hz – 22,000 Hz
DSP resolution 56 Bit
DSP power 172 MHz
Sampling rate 48 kHz
DSP type Audio signal processor
Signal converters A/D: BurrBrown
D/A: BurrBrown
Signal-to-noise ratio digital input –
Signal-to-noise ratio analog input 103 dB (A-weighted)
Distortion (THD) 0.01 %
Damping factor 100
Operating voltage 10.5 Volts (max. 5 sec.down to 6 Volts)
Current draw 670 mA
Max. remote output current 500 mA
Fuse 1 x 20 A Maxi-fuse (APX)
Additional features Variable input sensitivity, fully stabilized internal power supply with start-/stop capability, 56 Bit digital signal processing, internal memory for two different sound setups, USB input, MATCH Extension Card slot, input for optional remote control, stereo line outputs with balanced output transformers (floating ground)
Dimensions (H x W x D) 44 x 185 x 139 mm /
1.73 x 7.28 x 5.47“

Näytä vähemmän
1