Ostoskori on tyhjä.

Rockford Fosgate M2-500X1 Marine monovahvistin 500W

Rockford Fosgate M2-500X1 Marine monovahvistin 500W

4/5

Saatavuus : Varastossa

329,00  / kpl

Ilmainen toimitus yli 100 € tilauksiin!

Rockford Fosgate M2-500X1 Marine monovahvistin 500W

Suunniteltu kestämään luonnonelementtejä, M2-500X1 Element Ready vahvistin tarjoaa 500 wattia puhdasta tehoa, 4 tai 2 ohmin kuormiin.

Virtalähde joka tuottaa enemmän tehoa jännitteen noustessa ja integroitu Punch EQ joka korjaa akustisia puutteita tarjoten jopa 3 kertaisen basson.

Portaaton Infrasonic filtteri ja kaukosäädin mahdollistaa basson tason säätämisen helposti.

Rockford Fosgate M2-500X1 Marine monovahvistin 500W

 

The M2 Series were developed for marine audio environments that feature UV resistant protection and special internal conformal coating that protect the electronics from water. It’s designed for those who want a reliable – with all the power and performance you’ve come to expect from Rockford Fosgate – at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of M2 Series amplifiers are also designed to be easy to setup and configure, making them perfect for use in any application.

 

  • Element Ready™ design protects against outdoor exposure
  • Conformal coated circuit board protects against dust and water
  • UV stable powder coated cast aluminum heatsink
  • Zinc Nickel-plated Marine grade brass connection terminals
  • C.L.E.A.N. input/output clip detection and indicator LEDs
  • Optimized using AudioGraph PowerCube measurement tool
  • Continuously Variable On Board Punch EQ
  • Includes RLC Remote Level Control
  • Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
  • Top Mounted Control Panel
  • Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
  • Short Circuit & Over Current Protection
  • Variable Infrasonic Filter
  • Integrated Power and Speaker Terminals
  • Balanced Differential Inputs eliminates noise picked up by signal cables
  • RCA pass-thru outputs
  • Integration with OEM and Aftermarket Radios
  • “Auto-Sense” turn-on with remote out (high level in)
  • Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
  • Low Impedance Stability
  • Proprietary testing using RATS (Rockford Automated Testing System)
  • 2-Year Warranty
  • CEA-2006 Compliant & CE Compliant
  • Rollback Protection
Number of Channels
Total Power
(Sum of Rated Power) 500 Watts
Rated Power
(RMS Continuous Power) 300 Watts x 1 @ 4Ω / 500 Watts x 1 @ 2Ω
Dynamic Power  (PVC/PowerCube®) 350 Watts x 1 @ 4Ω / 590 Watts x 1 @ 2Ω
Frequency Response
20 Hz – 250 Hz
Input Sensitivity: Low-Level: 150 mV – 4 V, High-Level: 450 mV – 12 V
Circuit Topology Class Class D
Efficiency (average)
Total Harmonic Distortion (THD+Noise)
4Ω: <1.0%
2Ω: <1.0%
Signal Input
Low-Level: 2 RCA
High-Level: 4-Pin Molex
Signal Output
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)
Tone Controls
0 to +18 dB @ 45 Hz
Crossover Controls
Low-Pass:  50 Hz – 250 Hz @ 12dB/Octave Butterworth
Infrasonic:  15 Hz – 40 Hz @ 12dB/Octave Butterworth
Remote Controls Yes
Visual Indicators
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out
Power Wire Gauge 4 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge 8 AWG
Speaker Output Connector
Compression Terminal Block
Cooling
Convection
Heatsink
Operating Voltage 9 – 16 VDC
Recommended Fuse
(not included) 80 A
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave) 52 A
Suggested Alternator
Dimensional Diagram
Dimensions (H x W x D) 4.9 cm x 17.3 cm x 21.5 cm
Shipping Weight 2.18 Kg
1