Ostoskori on tyhjä.

Pro-Ject XTension 10 Evolution levysoitin Ortofon TA110 äänivarrella

Pro-Ject XTension 10 Evolution levysoitin Ortofon TA110 äänivarrella


Saatavuus : Varastossa

4.990,00  / kpl

Ilmainen toimitus yli 100 € tilauksiin!

Pro-Ject XTension 10 Evolution levysoitin Ortofon TA110 äänivarrella

Huipputason High End levysoittimen erikoismalli Ortofon TA110 äänivarrella, ilman esiasennettua äänirasiaa. Magneettisilla jaloilla varustettu vakaarakenteinen levysoitin joka painaa 22 kg.

Sähköinen kierrosnopeuden säätö 33/45/78 rpm, mukana toimitetaan suojakansi.


Pro-Ject XTension 10 Evolution levysoitin Ortofon TA110 äänivarrella


Ylivertainen levysoitin vinyylilevyjen kuuntelemiseen entistä kompaktimmassa kokoluokassa!


Toimitukseen sisältyy

• Xtension 10 Evo levysoitin Ortofon TA110 äänivarrella
• Connect it 5P-C RCA Välikaapeli
• Suojakansi
• Adapteri 7″ single levyille
• Record Puck järeä keskiöpuntti
• Vastapainot 4-14gr äänirasiolle
• Virtalähde, työkalut, vatupassi, hansikkaat




High-end turntable with Ortofon TA-110 tonearm

Superlative vinyl performance in a more compact size!

The Xtension 10 chassis is made from MDF filled with metal sand, that gives high mass and is non-resonant. Magnetic feet, which decouple the main plinth from its base, are combined with a weighty 22 kg total turntable mass. With these two magnets located in the feet, the turntable is practically floating.The result is a unique combination of ‘mass loaded’ and ‘floating turntable’ design principles. Instead of the old standard adoption of pure metal used for the main platter, we’ve found a perfect alloy which we damped on the inner side with Sorbothane®. Additionally we’ve glued recycled Vinyl records to the top (which act as a perfect mat) and bake this ‘sandwich’ before precision balancing it. The final product subsequently benefits from a wonderfully resonance-free, heavy platter, that runs ultrasilently on an inverted ceramic ball bearing with magnetic suspension. The Pro-Ject 10” Evolution with its tonearm base also benefits from ‘high-mass’ technologies, and is isolated from the main board by a sheet of Sorbothane®. To use this tonearm with a wide range of top quality phono cartridges, from 4 to 14 Grams it comes with a set of 4 different Sorbothane®- damped counterweights.



Pro-Ject Audio Systems offers their high-end turntables with premium 5pin > RCA unbalanced arm cable or – by request – with premium balanced 5pin > XLR connection to Pro-Ject Phono Box RS preamplifier. Phono Box RS offers balanced phono inputs, what guarantees superior results in high-end vinyl reproduction with a balanced signal source.
NOTE: The signal source and the receiving device have to be equipped with balanced connections. Transmission of audio signals in a balanced mode reduce the influence of interference due to external stray electric fields significantly.



Super-heavy 22 kg belt drive turntable
Mass loaded magnetic floating subchassis
Precision balanced sandwich-platter
Inverted ceramic ball bearing with magnetic support
Heavy weight record clamp
Extremely low level of natural resonance
Perfect decoupling through magnetic feet
Electronic speed control 33/45/78 rpm
Tonearm 10cc Evolution made from carbon fibre
Inverted tonearm bearings (ABEC 7 quality)
Dust cover included

Speed 33 / 45 / 78 rpm (Speed Box DS built-in)
Acrylic dust cover yes
Pro-Ject tonearm cable included Connect it 5P-C
Aluminium feet Magnetic supported & Sorbothane damped
Turntable main bearing damping heavy weight metal block
Max. speed variance ±0,08%
Max. wow and flutter ±0,01% Max.
Rumble -73dB
Platter weight/diameter 5,7kg/300mm
Effective arm length / overhang 254mm / 16mm
Effective tonearm mass 8,5g
Tracking force range 10-30mN
Cartridge weight range from 4 – 14g (4 different counterweights included)
External power supply (prim/sec) 220 – 240V/50Hz / 16V/1.000mA AC
Power consumption 15W (max.)
DimensionsWxHxD lid closed (lid open) 480 x 235 (495) x 400 (535)mm

22 kg


TA-110 Technical data

• Effective mass without headshell: 3.5 g

• Mass of supplied headshell: 15.5 g

• Effective armlength (distance between the stylus and pivot point): 231.0 mm

• Mounting distance (distance between the pivot point and turntable center): 213.0 mm

• Offset angle: 23.9 degrees

• Overhang: 18.0 mm

• Tracking force adjusting range direct reading: 0-3 g

• Tracking force adjusting range with extra mass ring mounted: 0-4 g

• Height adjustment range: 35-55 mm • Diameter of the armbase mounting hole: 19-20 mm

• Diameter of the center shaft of tonearm: 18.0 mm

• Inner null point: 66 mm

• Outer null point: 120.9 mm

• Counterweight for cartridge + headshell mass between 21 and 28 g included

• Headshell LH-2000E included, weight: 15.5 g

• TA-110 total weight including headshell: 470 g

• Set of tonearm cables 6NX-TSW-1010 included

• Extra mass ring for heavier cartridges included, weight 45 g

Roberts Uno BT​ -retroradio

Voita minut!

Tutustu tuotteeseen tästä.

Tilaa uutiskirjeemme ja osallistut samalla arvontaan joka suoritetaan 1.12.2022.