Ostoskori on tyhjä.

Ostoskori on tyhjä.

Ortofon Stylus MFS

Ortofon Stylus MFS

4/5

Saatavuus : Kysy lisää

–100%

40,00  /kpl

Ilmainen toimitus yli 100 € tilauksiin!

Ortofon Stylus MFS Vaihtoneula

Vaihtoneula Ortofon Made From Scratch äänirasialle.

Made From Scratch replacement stylus

To support our customers who own the Concorde MFS we will continue to manufacture replacement stylus MFS.

Features:
–    Spherical stylus, which can stand up to heavy back-cueing
–    High output for clear sound from a mixer/preamplifier
–    Non-compromising energetic sound quality
 
Made From Scratch stylus Technical data

Output voltage at 1000Hz, 5cm/sec. – 7 mV
Channel balance at 1kHz –  1,5 dB
Channel separation at 1kHz  – 25 dB
Channel separation at 15 kHz  – 15 dB
Frequency range at -3dB  – 20-20.000 Hz
Frequency response  – 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force –  80 μm
Compliance, dynamic lateral  –  6 μm/m N
Stylus type –  Spherical
Stylus tip radius –  R 18 μm

Tracking force range –  3,0-5,0 g (30-50 mN)
Tracking force recommended – 4,0 g (40 mN)
Tracking angle  – 20°
Internal impedance, DC resistance –  750 Ohm
Internal inductance  – 450 mH
Recommended load resistance –  47 kOhm
Recommended load capacitance –  200-600 pF
Cartridge weight  – 18,5 g

Compatible with cartridges – Made From Scratch (discontinued and no longer available)

Jatka lukemista

Made From Scratch replacement stylus

To support our customers who own the Concorde MFS we will continue to manufacture replacement stylus MFS.

Features:
–    Spherical stylus, which can stand up to heavy back-cueing
–    High output for clear sound from a mixer/preamplifier
–    Non-compromising energetic sound quality
 
Made From Scratch stylus Technical data

Output voltage at 1000Hz, 5cm/sec. – 7 mV
Channel balance at 1kHz –  1,5 dB
Channel separation at 1kHz  – 25 dB
Channel separation at 15 kHz  – 15 dB
Frequency range at -3dB  – 20-20.000 Hz
Frequency response  – 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force –  80 μm
Compliance, dynamic lateral  –  6 μm/m N
Stylus type –  Spherical
Stylus tip radius –  R 18 μm

Tracking force range –  3,0-5,0 g (30-50 mN)
Tracking force recommended – 4,0 g (40 mN)
Tracking angle  – 20°
Internal impedance, DC resistance –  750 Ohm
Internal inductance  – 450 mH
Recommended load resistance –  47 kOhm
Recommended load capacitance –  200-600 pF
Cartridge weight  – 18,5 g

Compatible with cartridges – Made From Scratch (discontinued and no longer available)

Näytä vähemmän
1