Ostoskori on tyhjä.

MATCH PP86DSP 8-Kanavainen DSP vahvistin

MATCH PP86DSP 8-Kanavainen DSP vahvistin


Saatavuus : Varastossa

599,00  / kpl

Ilmainen toimitus yli 100 € tilauksiin!

MATCH PP86DSP 8-Kanavainen DSP vahvistin

Auton alkuperäiseen järjestelmään integroitavissa oleva (autokohtaiset adapterit myydään erikseen) ohjelmoitava 8-kanavainen DSP vahvistin.

Ohjaa maksimissaan 8:aa kaiutinta, teho @ 4ohm 8x55W / 110W, teho @ 2ohm 8x70W / 140W.


MATCH PP86DSP 8-Kanavainen DSP vahvistin

The powerhouse within the MATCH series for individual system concepts – not less than eight amplifier channels and even nine separate DSP channels make this extremely powerful Plug & Play amplifier to a sound virtuoso for the expansion of OEM sound systems. The ″heart″ of the PP 86DSP is a 64 Bit DSP of the latest generation with enormous processing power and ultimate sound optimization opportunities. The package is complemented by Audiotec Fischers proprietary Class HD technology which combines maximum efficiency with minimum space requirements. Besides a 6-channel highlevel input with ADEP circuit (Advanced Diagnostics Error Protection), the PP 86DSP is as well equipped with a MATCH Extension Card slot. This allows adding further interfaces like a Bluetooth® Audio Streaming module or a High Resolution Audio USB soundcard. Thanks to the professional and user-friendly DSP PC-Tool V4 software with its bunch of new functions an individual sound setup becomes straightforward and intuitive. No doubt – a sound upgrade with this amplifier will be a lot of fun.

Output power RMS / max.
– @ 4 Ohms 8 x 55 / 110 Watts
– @ 2 Ohms 8 x 70 / 140 Watts
– @ 1 Ohm –
– bridged @ 4 Ohms –
– bridged @ 2 Ohms –
– Subwoofer output @ 4 Ohms –
– Subwoofer output @ 2 Ohms –
Amplifier technology Class HD
Inputs 6 x Highlevel speaker input
1 x Optical SPDIF (12 – 96 kHz)
1x MEC
1 x Remote In
Input sensitivity Highlevel 5 – 11 Volts
Input impedance RCA / Cinch –
Input impedance highlevel 13 Ohms
Outputs 8 x Speaker output
2 x RCA / Cinch (mono)
2 x Remote Out
Output voltage RCA / Cinch 3 Volts RMS
Frequency response 20 Hz -22,000 Hz
DSP resolution 64 Bit
DSP power 295 MHz (1.2 billion MAC operations/second)
Sampling rate 48 kHz
DSP type Audio signal processor
Signal converters A/D: BurrBrown
D/A: BurrBrown
Signal-to-noise ratio digital input 105 dB (A-weighted)
Signal-to-noise ratio analog input 103 dB (A-weighted)
Distortion (THD) 0.015 %
Damping factor 100
Operating voltage 10.5 – 16 Volts (max. 5 sec.down to 6 Volts)
Current draw 685 mA
Max. remote output current 500 mA
Fuse 2 x 25 A LP-Mini-fuse (APS)
Additional features Class HD technology with dynamically controlled
power supply, Start-Stop capability, Control Input,
USB, MEC slot, Auto Remote switch, galvanically
isolated Line Out
Dimensions (H x W x D) 50 x 260 x 190 mm /
1.97 x 10.24 x 7.48“

Tarvitsetkö myös näitä?

Voisit olla kiinnostunut myös näistä?